# Apache模块 mod_authnz_ldap
| [说明](#calibre_link-11) | 允许使用一个LDAP目录存储用户名和密码数据库来执行基本认证和授权 |
| --- | --- |
| [状态](#calibre_link-12) | 扩展(E) |
| [模块名](#calibre_link-13) | authnz_ldap_module |
| [源文件](#calibre_link-14) | mod_authnz_ldap.c |
| [兼容性](#calibre_link-58) | 仅在 Apache 2.1 及以后的版本中可用 |
### 概述
This module provides authentication front-ends such as `mod_auth_basic` to authenticate users through an ldap directory.
`mod_authnz_ldap` supports the following features:
* Known to support the [OpenLDAP SDK](http://www.openldap.org/) (both 1.x and 2.x), [Novell LDAP SDK](http://developer.novell.com/ndk/cldap.htm) and the [iPlanet (Netscape)](http://www.iplanet.com/downloads/developer/) SDK.
* Complex authorization policies can be implemented by representing the policy with LDAP filters.
* Uses extensive caching of LDAP operations via [mod_ldap](#calibre_link-540).
* Support for LDAP over SSL (requires the Netscape SDK) or TLS (requires the OpenLDAP 2.x SDK or Novell LDAP SDK).
When using `mod_auth_basic`, this module is invoked via the `AuthBasicProvider` directive with the `ldap` value.
## Contents
* [Operation](#calibre_link-970)
* [The Authentication Phase](#calibre_link-971)
* [The Authorization Phase](#calibre_link-972)
* [The require Directives](#calibre_link-973)
* [require valid-user](#calibre_link-974)
* [require ldap-user](#calibre_link-975)
* [require ldap-group](#calibre_link-976)
* [require ldap-dn](#calibre_link-977)
* [require ldap-attribute](#calibre_link-978)
* [require ldap-filter](#calibre_link-979)
* [Examples](#calibre_link-980)
* [Using TLS](#calibre_link-981)
* [Using SSL](#calibre_link-982)
* [Using Microsoft FrontPage with ](#calibre_link-983)`mod_authnz_ldap`
* [How It Works](#calibre_link-984)
* [Caveats](#calibre_link-985)
## Operation
There are two phases in granting access to a user. The first phase is authentication, in which the `mod_authnz_ldap` authentication provider verifies that the user's credentials are valid. This is also called the _search/bind_ phase. The second phase is authorization, in which `mod_authnz_ldap` determines if the authenticated user is allowed access to the resource in question. This is also known as the _compare_ phase.
`mod_authnz_ldap` registers both an authn_ldap authentication provider and an authz_ldap authorization handler. The authn_ldap authentication provider can be enabled through the `AuthBasicProvider` directive using the `ldap` value. The authz_ldap handler extends the `Require` directive's authorization types by adding `ldap-user`, `ldap-dn`和`ldap-group` values.
### The Authentication Phase
During the authentication phase, `mod_authnz_ldap` searches for an entry in the directory that matches the username that the HTTP client passes. If a single unique match is found, then `mod_authnz_ldap` attempts to bind to the directory server using the DN of the entry plus the password provided by the HTTP client. Because it does a search, then a bind, it is often referred to as the search/bind phase. Here are the steps taken during the search/bind phase.
1. Generate a search filter by combining the attribute and filter provided in the `AuthLDAPURL` directive with the username passed by the HTTP client.
2. Search the directory using the generated filter. If the search does not return exactly one entry, deny or decline access.
3. Fetch the distinguished name of the entry retrieved from the search and attempt to bind to the LDAP server using the DN and the password passed by the HTTP client. If the bind is unsuccessful, deny or decline access.
The following directives are used during the search/bind phase
| `AuthLDAPURL` | Specifies the LDAP server, the base DN, the attribute to use in the search, as well as the extra search filter to use. |
| --- | --- |
| `AuthLDAPBindDN` | An optional DN to bind with during the search phase. |
| `AuthLDAPBindPassword` | An optional password to bind with during the search phase. |
### The Authorization Phase
During the authorization phase, `mod_authnz_ldap` attempts to determine if the user is authorized to access the resource. Many of these checks require `mod_authnz_ldap` to do a compare operation on the LDAP server. This is why this phase is often referred to as the compare phase. `mod_authnz_ldap` accepts the following `Require` directives to determine if the credentials are acceptable:
* Grant access if there is a [`require ldap-user`](#calibre_link-976) directive, and the username in the directive matches the username passed by the client.
* Grant access if there is a [`require ldap-dn`](#calibre_link-977) directive, and the DN in the directive matches the DN fetched from the LDAP directory.
* Grant access if there is a [`require ldap-group`](#calibre_link-976) directive, and the DN fetched from the LDAP directory (or the username passed by the client) occurs in the LDAP group.
* Grant access if there is a [`require ldap-attribute`](#calibre_link-978) directive, and the attribute fetched from the LDAP directory matches the given value.
* Grant access if there is a [`require ldap-filter`](#calibre_link-979) directive, and the search filter successfully finds a single user object that matches the dn of the authenticated user.
* otherwise, deny or decline access
Other `Require` values may also be used which may require loading additional authorization modules.
* Grant access if there is a [`require valid-user`](#calibre_link-975) directive. (requires `mod_authz_user`)
* Grant access if there is a [`require group`](#calibre_link-976) directive, and `mod_authz_groupfile` has been loaded with the `AuthGroupFile` directive set.
* others...
`mod_authnz_ldap` uses the following directives during the compare phase:
| `AuthLDAPURL` | The attribute specified in the URL is used in compare operations for the `require ldap-user` operation. |
| --- | --- |
| `AuthLDAPCompareDNOnServer` | Determines the behavior of the `require ldap-dn` directive. |
| `AuthLDAPGroupAttribute` | Determines the attribute to use for comparisons in the `require ldap-group` directive. |
| `AuthLDAPGroupAttributeIsDN` | Specifies whether to use the user DN or the username when doing comparisons for the `require ldap-group` directive. |
## The require Directives
Apache's `Require` directives are used during the authorization phase to ensure that a user is allowed to access a resource. mod_authnz_ldap extends the authorization types with `ldap-user`, `ldap-dn`, `ldap-group`, `ldap-attribute`和`ldap-filter`. Other authorization types may also be used but may require that additional authorization modules be loaded.
### require valid-user
If this directive exists, `mod_authnz_ldap` grants access to any user that has successfully authenticated during the search/bind phase. Requires that `mod_authz_user` be loaded and that the `AuthzLDAPAuthoritative` directive be set to off.
### require ldap-user
`require ldap-user` directive specifies what usernames can access the resource. Once `mod_authnz_ldap` has retrieved a unique DN from the directory, it does an LDAP compare operation using the username specified in the `require ldap-user` to see if that username is part of the just-fetched LDAP entry. Multiple users can be granted access by putting multiple usernames on the line, separated with spaces. If a username has a space in it, then it must be surrounded with double quotes. Multiple users can also be granted access by using multiple `require ldap-user` directives, with one user per line. For example, with a `AuthLDAPURL` of `ldap://ldap/o=Airius?cn` (i.e., `cn` is used for searches), the following require directives could be used to restrict access:
```
require ldap-user "Barbara Jenson"
require ldap-user "Fred User"
require ldap-user "Joe Manager"
```
Because of the way that `mod_authnz_ldap` handles this directive, Barbara Jenson could sign on as _Barbara Jenson_, _Babs Jenson_ or any other `cn` that she has in her LDAP entry. Only the single `require ldap-user` line is needed to support all values of the attribute in the user's entry.
If the `uid` attribute was used instead of the `cn` attribute in the URL above, the above three lines could be condensed to
```
require ldap-user bjenson fuser jmanager
```
### require ldap-group
This directive specifies an LDAP group whose members are allowed access. It takes the distinguished name of the LDAP group. Note: Do not surround the group name with quotes. For example, assume that the following entry existed in the LDAP directory:
```
dn: cn=Administrators, o=Airius
objectClass: groupOfUniqueNames
uniqueMember: cn=Barbara Jenson, o=Airius
uniqueMember: cn=Fred User, o=Airius
```
The following directive would grant access to both Fred and Barbara:
```
require ldap-group cn=Administrators, o=Airius
```
Behavior of this directive is modified by the `AuthLDAPGroupAttribute`和`AuthLDAPGroupAttributeIsDN` directives.
### require ldap-dn
`require ldap-dn` directive allows the administrator to grant access based on distinguished names. It specifies a DN that must match for access to be granted. If the distinguished name that was retrieved from the directory server matches the distinguished name in the `require ldap-dn`, then authorization is granted. Note: do not surround the distinguished name with quotes.
The following directive would grant access to a specific DN:
```
require ldap-dn cn=Barbara Jenson, o=Airius
```
Behavior of this directive is modified by the `AuthLDAPCompareDNOnServer` directive.
### require ldap-attribute
`require ldap-attribute` directive allows the administrator to grant access based on attributes of the authenticated user in the LDAP directory. If the attribute in the directory matches the value given in the configuration, access is granted.
The following directive would grant access to anyone with the attribute employeeType = active
```
require ldap-attribute employeeType=active
```
Multiple attribute/value pairs can be specified on the same line separated by spaces or they can be specified in multiple `require ldap-attribute` directives. The effect of listing multiple attribute/values pairs is an OR operation. Access will be granted if any of the listed attribute values match the value of the corresponding attribute in the user object. If the value of the attribute contains a space, only the value must be within double quotes.
The following directive would grant access to anyone with the city attribute equal to "San Jose" or status equal to "Active"
```
require ldap-attribute city="San Jose" status=active
```
### require ldap-filter
`require ldap-filter` directive allows the administrator to grant access based on a complex LDAP search filter. If the dn returned by the filter search matches the authenticated user dn, access is granted.
The following directive would grant access to anyone having a cell phone and is in the marketing department
```
require ldap-filter &(cell=*)(department=marketing)
```
The difference between the `require ldap-filter` directive and the `require ldap-attribute` directive is that `ldap-filter` performs a search operation on the LDAP directory using the specified search filter rather than a simple attribute comparison. If a simple attribute comparison is all that is required, the comparison operation performed by `ldap-attribute` will be faster than the search operation used by `ldap-filter` especially within a large directory.
## Examples
* Grant access to anyone who exists in the LDAP directory, using their UID for searches.
```
AuthLDAPURL ldap://ldap1.airius.com:389/ou=People, o=Airius?uid?sub?(objectClass=*)
require valid-user
```
* The next example is the same as above; but with the fields that have useful defaults omitted. Also, note the use of a redundant LDAP server.
```
AuthLDAPURL ldap://ldap1.airius.com ldap2.airius.com/ou=People, o=Airius
require valid-user
```
* The next example is similar to the previous one, but it uses the common name instead of the UID. Note that this could be problematical if multiple people in the directory share the same `cn`, because a search on `cn` **must** return exactly one entry. That's why this approach is not recommended: it's a better idea to choose an attribute that is guaranteed unique in your directory, such as `uid`.
```
AuthLDAPURL ldap://ldap.airius.com/ou=People, o=Airius?cn
require valid-user
```
* Grant access to anybody in the Administrators group. The users must authenticate using their UID.
```
AuthLDAPURL ldap://ldap.airius.com/o=Airius?uid
require ldap-group cn=Administrators, o=Airius
```
* The next example assumes that everyone at Airius who carries an alphanumeric pager will have an LDAP attribute of `qpagePagerID`. The example will grant access only to people (authenticated via their UID) who have alphanumeric pagers:
```
AuthLDAPURL ldap://ldap.airius.com/o=Airius?uid??(qpagePagerID=*)
require valid-user
```
* The next example demonstrates the power of using filters to accomplish complicated administrative requirements. Without filters, it would have been necessary to create a new LDAP group and ensure that the group's members remain synchronized with the pager users. This becomes trivial with filters. The goal is to grant access to anyone who has a pager, plus grant access to Joe Manager, who doesn't have a pager, but does need to access the same resource:
```
AuthLDAPURL ldap://ldap.airius.com/o=Airius?uid??(|(qpagePagerID=*)(uid=jmanager))
require valid-user
```
This last may look confusing at first, so it helps to evaluate what the search filter will look like based on who connects, as shown below. If Fred User connects as `fuser`, the filter would look like
```
(&(|(qpagePagerID=*)(uid=jmanager))(uid=fuser))
```
The above search will only succeed if _fuser_ has a pager. When Joe Manager connects as _jmanager_, the filter looks like
```
(&(|(qpagePagerID=*)(uid=jmanager))(uid=jmanager))
```
The above search will succeed whether _jmanager_ has a pager or not.
## Using TLS
To use TLS, see the `mod_ldap` directives `LDAPTrustedClientCert`, `LDAPTrustedGlobalCert`和`LDAPTrustedMode`.
An optional second parameter can be added to the `AuthLDAPURL` to override the default connection type set by `LDAPTrustedMode`. This will allow the connection established by an _ldap://_ Url to be upgraded to a secure connection on the same port.
## Using SSL
To use SSL, see the `mod_ldap` directives `LDAPTrustedClientCert`, `LDAPTrustedGlobalCert`和`LDAPTrustedMode`.
To specify a secure LDAP server, use _ldaps://_ in the `AuthLDAPURL` directive, instead of _ldap://_.
## Using Microsoft FrontPage with mod_authnz_ldap
Normally, FrontPage uses FrontPage-web-specific user/group files (i.e., the `mod_authn_file`和`mod_authz_groupfile` modules) to handle all authentication. Unfortunately, it is not possible to just change to LDAP authentication by adding the proper directives, because it will break the _Permissions_ forms in the FrontPage client, which attempt to modify the standard text-based authorization files.
Once a FrontPage web has been created, adding LDAP authentication to it is a matter of adding the following directives to _every_ `.htaccess` file that gets created in the web
```
AuthLDAPURL "the url"
AuthzLDAPAuthoritative off
AuthGroupFile _mygroupfile_
require group _mygroupfile_
```
`AuthzLDAPAuthoritative` must be off to allow `mod_authnz_ldap` to decline group authentication so that Apache will fall back to file authentication for checking group membership. This allows the FrontPage-managed group file to be used.
### How It Works
FrontPage restricts access to a web by adding the `require valid-user` directive to the `.htaccess` files. The `require valid-user` directive will succeed for any user who is valid _as far as LDAP is concerned_. This means that anybody who has an entry in the LDAP directory is considered a valid user, whereas FrontPage considers only those people in the local user file to be valid. By substituting the ldap-group with group file authorization, Apache is allowed to consult the local user file (which is managed by FrontPage) - instead of LDAP - when handling authorizing the user.
Once directives have been added as specified above, FrontPage users will be able to perform all management operations from the FrontPage client.
### Caveats
* When choosing the LDAP URL, the attribute to use for authentication should be something that will also be valid for putting into a `mod_authn_file` user file. The user ID is ideal for this.
* When adding users via FrontPage, FrontPage administrators should choose usernames that already exist in the LDAP directory (for obvious reasons). Also, the password that the administrator enters into the form is ignored, since Apache will actually be authenticating against the password in the LDAP database, and not against the password in the local user file. This could cause confusion for web administrators.
* Apache must be compiled with `mod_auth_basic`, `mod_authn_file`和`mod_authz_groupfile` in order to use FrontPage support. This is because Apache will still use the `mod_authz_groupfile` group file for determine the extent of a user's access to the FrontPage web.
* The directives must be put in the `.htaccess` files. Attempting to put them inside `<Location>`或`<Directory>` directives won't work. This is because `mod_authnz_ldap` has to be able to grab the `AuthGroupFile` directive that is found in FrontPage `.htaccess` files so that it knows where to look for the valid user list. If the `mod_authnz_ldap` directives aren't in the same `.htaccess` file as the FrontPage directives, then the hack won't work, because `mod_authnz_ldap` will never get a chance to process the `.htaccess` file, and won't be able to find the FrontPage-managed user file.
## AuthLDAPBindDN 指令
| [说明](#calibre_link-18) | Optional DN to use in binding to the LDAP server |
| --- | --- |
| [语法](#calibre_link-19) | `AuthLDAPBindDN _distinguished-name_` |
| [作用域](#calibre_link-20) | directory, .htaccess |
| [覆盖项](#calibre_link-66) | AuthConfig |
| [状态](#calibre_link-21) | 扩展(E) |
| [模块](#calibre_link-22) | mod_authnz_ldap |
An optional DN used to bind to the server when searching for entries. If not provided, `mod_authnz_ldap` will use an anonymous bind.
## AuthLDAPBindPassword 指令
| [说明](#calibre_link-18) | Password used in conjuction with the bind DN |
| --- | --- |
| [语法](#calibre_link-19) | `AuthLDAPBindPassword _password_` |
| [作用域](#calibre_link-20) | directory, .htaccess |
| [覆盖项](#calibre_link-66) | AuthConfig |
| [状态](#calibre_link-21) | 扩展(E) |
| [模块](#calibre_link-22) | mod_authnz_ldap |
A bind password to use in conjunction with the bind DN. Note that the bind password is probably sensitive data, and should be properly protected. You should only use the `AuthLDAPBindDN`和`AuthLDAPBindPassword` if you absolutely need them to search the directory.
## AuthLDAPCharsetConfig 指令
| [说明](#calibre_link-18) | Language to charset conversion configuration file |
| --- | --- |
| [语法](#calibre_link-19) | `AuthLDAPCharsetConfig _file-path_` |
| [作用域](#calibre_link-20) | server config |
| [状态](#calibre_link-21) | 扩展(E) |
| [模块](#calibre_link-22) | mod_authnz_ldap |
`AuthLDAPCharsetConfig` directive sets the location of the language to charset conversion configuration file. File-path is relative to the `ServerRoot`. This file specifies the list of language extensions to character sets. Most administrators use the provided `charset.conv` file, which associates common language extensions to character sets.
The file contains lines in the following format:
```
<var class="calibre40">Language-Extension</var> <var class="calibre40">charset</var> [<var class="calibre40">Language-String</var>] ...
```
The case of the extension does not matter. Blank lines, and lines beginning with a hash character (`#`) are ignored.
## AuthLDAPCompareDNOnServer 指令
| [说明](#calibre_link-18) | Use the LDAP server to compare the DNs |
| --- | --- |
| [语法](#calibre_link-19) | `AuthLDAPCompareDNOnServer on|off` |
| [默认值](#calibre_link-24) | `AuthLDAPCompareDNOnServer on` |
| [作用域](#calibre_link-20) | directory, .htaccess |
| [覆盖项](#calibre_link-66) | AuthConfig |
| [状态](#calibre_link-21) | 扩展(E) |
| [模块](#calibre_link-22) | mod_authnz_ldap |
When set, `mod_authnz_ldap` will use the LDAP server to compare the DNs. This is the only foolproof way to compare DNs. `mod_authnz_ldap` will search the directory for the DN specified with the [`require dn`](#calibre_link-977) directive, then, retrieve the DN and compare it with the DN retrieved from the user entry. If this directive is not set, `mod_authnz_ldap` simply does a string comparison. It is possible to get false negatives with this approach, but it is much faster. Note the `mod_ldap` cache can speed up DN comparison in most situations.
## AuthLDAPDereferenceAliases 指令
| [说明](#calibre_link-18) | When will the module de-reference aliases |
| --- | --- |
| [语法](#calibre_link-19) | `AuthLDAPDereferenceAliases never|searching|finding|always` |
| [默认值](#calibre_link-24) | `AuthLDAPDereferenceAliases Always` |
| [作用域](#calibre_link-20) | directory, .htaccess |
| [覆盖项](#calibre_link-66) | AuthConfig |
| [状态](#calibre_link-21) | 扩展(E) |
| [模块](#calibre_link-22) | mod_authnz_ldap |
This directive specifies when `mod_authnz_ldap` will de-reference aliases during LDAP operations. The default is `always`.
## AuthLDAPGroupAttribute 指令
| [说明](#calibre_link-18) | LDAP attributes used to check for group membership |
| --- | --- |
| [语法](#calibre_link-19) | `AuthLDAPGroupAttribute _attribute_` |
| [作用域](#calibre_link-20) | directory, .htaccess |
| [覆盖项](#calibre_link-66) | AuthConfig |
| [状态](#calibre_link-21) | 扩展(E) |
| [模块](#calibre_link-22) | mod_authnz_ldap |
This directive specifies which LDAP attributes are used to check for group membership. Multiple attributes can be used by specifying this directive multiple times. If not specified, then `mod_authnz_ldap` uses the `member`和`uniquemember` attributes.
## AuthLDAPGroupAttributeIsDN 指令
| [说明](#calibre_link-18) | Use the DN of the client username when checking for group membership |
| --- | --- |
| [语法](#calibre_link-19) | `AuthLDAPGroupAttributeIsDN on|off` |
| [默认值](#calibre_link-24) | `AuthLDAPGroupAttributeIsDN on` |
| [作用域](#calibre_link-20) | directory, .htaccess |
| [覆盖项](#calibre_link-66) | AuthConfig |
| [状态](#calibre_link-21) | 扩展(E) |
| [模块](#calibre_link-22) | mod_authnz_ldap |
When set `on`, this directive says to use the distinguished name of the client username when checking for group membership. Otherwise, the username will be used. For example, assume that the client sent the username `bjenson`, which corresponds to the LDAP DN `cn=Babs Jenson, o=Airius`. If this directive is set, `mod_authnz_ldap` will check if the group has `cn=Babs Jenson, o=Airius` as a member. If this directive is not set, then `mod_authnz_ldap` will check if the group has `bjenson` as a member.
## AuthLDAPRemoteUserIsDN 指令
| [说明](#calibre_link-18) | Use the DN of the client username to set the REMOTE_USER environment variable |
| --- | --- |
| [语法](#calibre_link-19) | `AuthLDAPRemoteUserIsDN on|off` |
| [默认值](#calibre_link-24) | `AuthLDAPRemoteUserIsDN off` |
| [作用域](#calibre_link-20) | directory, .htaccess |
| [覆盖项](#calibre_link-66) | AuthConfig |
| [状态](#calibre_link-21) | 扩展(E) |
| [模块](#calibre_link-22) | mod_authnz_ldap |
If this directive is set to on, the value of the `REMOTE_USER` environment variable will be set to the full distinguished name of the authenticated user, rather than just the username that was passed by the client. It is turned off by default.
## AuthLDAPUrl 指令
| [说明](#calibre_link-18) | URL specifying the LDAP search parameters |
| --- | --- |
| [语法](#calibre_link-19) | `AuthLDAPUrl _url [NONE|SSL|TLS|STARTTLS]_` |
| [作用域](#calibre_link-20) | directory, .htaccess |
| [覆盖项](#calibre_link-66) | AuthConfig |
| [状态](#calibre_link-21) | 扩展(E) |
| [模块](#calibre_link-22) | mod_authnz_ldap |
An RFC 2255 URL which specifies the LDAP search parameters to use. The syntax of the URL is
```
ldap://host:port/basedn?attribute?scope?filter
```
ldap
For regular ldap, use the string `ldap`. For secure LDAP, use `ldaps` instead. Secure LDAP is only available if Apache was linked to an LDAP library with SSL support.
host:port
The name/port of the ldap server (defaults to `localhost:389` for `ldap`, and `localhost:636` for `ldaps`). To specify multiple, redundant LDAP servers, just list all servers, separated by spaces. `mod_authnz_ldap` will try connecting to each server in turn, until it makes a successful connection.
Once a connection has been made to a server, that connection remains active for the life of the `httpd` process, or until the LDAP server goes down.
If the LDAP server goes down and breaks an existing connection, `mod_authnz_ldap` will attempt to re-connect, starting with the primary server, and trying each redundant server in turn. Note that this is different than a true round-robin search.
basedn
The DN of the branch of the directory where all searches should start from. At the very least, this must be the top of your directory tree, but could also specify a subtree in the directory.
attribute
The attribute to search for. Although RFC 2255 allows a comma-separated list of attributes, only the first attribute will be used, no matter how many are provided. If no attributes are provided, the default is to use `uid`. It's a good idea to choose an attribute that will be unique across all entries in the subtree you will be using.
scope
The scope of the search. Can be either `one`或`sub`. Note that a scope of `base` is also supported by RFC 2255, but is not supported by this module. If the scope is not provided, or if `base` scope is specified, the default is to use a scope of `sub`.
filter
A valid LDAP search filter. If not provided, defaults to `(objectClass=*)`, which will search for all objects in the tree. Filters are limited to approximately 8000 characters (the definition of `MAX_STRING_LEN` in the Apache source code). This should be than sufficient for any application.
When doing searches, the attribute, filter and username passed by the HTTP client are combined to create a search filter that looks like `(&(_filter_)(_attribute_=_username_))`.
For example, consider an URL of `ldap://ldap.airius.com/o=Airius?cn?sub?(posixid=*)`. When a client attempts to connect using a username of `Babs Jenson`, the resulting search filter will be `(&(posixid=*)(cn=Babs Jenson))`.
An optional parameter can be added to allow the LDAP Url to override the connection type. This parameter can be one of the following:
NONE
Establish an unsecure connection on the default LDAP port. This is the same as `ldap://` on port 389.
SSL
Establish a secure connection on the default secure LDAP port. This is the same as `ldaps://`
TLS | STARTTLS
Establish an upgraded secure connection on the default LDAP port. This connection will be initiated on port 389 by default and then upgraded to a secure connection on the same port.
See above for examples of `AuthLDAPURL` URLs.
## AuthzLDAPAuthoritative 指令
| [说明](#calibre_link-18) | Prevent other authentication modules from authenticating the user if this one fails |
| --- | --- |
| [语法](#calibre_link-19) | `AuthzLDAPAuthoritative on|off` |
| [默认值](#calibre_link-24) | `AuthzLDAPAuthoritative on` |
| [作用域](#calibre_link-20) | directory, .htaccess |
| [覆盖项](#calibre_link-66) | AuthConfig |
| [状态](#calibre_link-21) | 扩展(E) |
| [模块](#calibre_link-22) | mod_authnz_ldap |
Set to `off` if this module should let other authentication modules attempt to authenticate the user, should authentication with this module fail. Control is only passed on to lower modules if there is no DN or rule that matches the supplied user name (as passed by the client).
- Apache HTTP Server Version 2.2 文档 [最后更新：2006年3月21日]
- 版本说明
- 从1.3升级到2.0
- 从2.0升级到2.2
- Apache 2.2 新特性概述
- Apache 2.0 新特性概述
- The Apache License, Version 2.0
- 参考手册
- 编译与安装
- 启动Apache
- 停止和重启
- 配置文件
- 配置段(容器)
- 缓冲指南
- 服务器全局配置
- 日志文件
- 从URL到文件系统的映射
- 安全方面的提示
- 动态共享对象(DSO)支持
- 内容协商
- 自定义错误响应
- 地址和端口的绑定(Binding)
- 多路处理模块
- Apache的环境变量
- Apache处理器的使用
- 过滤器(Filter)
- suEXEC支持
- 性能方面的提示
- URL重写指南
- Apache虚拟主机文档
- 基于主机名的虚拟主机
- 基于IP地址的虚拟主机
- 大批量虚拟主机的动态配置
- 虚拟主机示例
- 深入研究虚拟主机的匹配
- 文件描述符限制
- 关于DNS和Apache
- 常见问题
- 经常问到的问题
- Apache的SSL/TLS加密
- SSL/TLS高强度加密：绪论
- SSL/TLS高强度加密：兼容性
- SSL/TLS高强度加密：如何...?
- SSL/TLS Strong Encryption: FAQ
- 如何.../指南
- 认证、授权、访问控制
- CGI动态页面
- 服务器端包含入门
- .htaccess文件
- 用户网站目录
- 针对特定平台的说明
- 在Microsoft Windows中使用Apache
- 在Microsoft Windows上编译Apache
- Using Apache With Novell NetWare
- Running a High-Performance Web Server on HPUX
- The Apache EBCDIC Port
- 服务器和支持程序
- httpd - Apache超文本传输协议服务器
- ab - Apache HTTP服务器性能测试工具
- apachectl - Apache HTTP服务器控制接口
- apxs - Apache 扩展工具
- configure - 配置源代码树
- dbmmanage - 管理DBM格式的用户认证文件
- htcacheclean - 清理磁盘缓冲区
- htdbm - 操作DBM密码数据库
- htdigest - 管理用于摘要认证的用户文件
- httxt2dbm - 生成RewriteMap指令使用的dbm文件
- htpasswd - 管理用于基本认证的用户文件
- logresolve - 解析Apache日志中的IP地址为主机名
- rotatelogs - 滚动Apache日志的管道日志程序
- suexec - 在执行外部程序之前切换用户
- 其他程序
- 杂项文档
- 与Apache相关的标准
- Apache模块
- 描述模块的术语
- 描述指令的术语
- Apache核心(Core)特性
- Apache MPM 公共指令
- Apache MPM beos
- Apache MPM event
- Apache MPM netware
- Apache MPM os2
- Apache MPM prefork
- Apache MPM winnt
- Apache MPM worker
- Apache模块 mod_actions
- Apache模块 mod_alias
- Apache模块 mod_asis
- Apache模块 mod_auth_basic
- Apache模块 mod_auth_digest
- Apache模块 mod_authn_alias
- Apache模块 mod_authn_anon
- Apache模块 mod_authn_dbd
- Apache模块 mod_authn_dbm
- Apache模块 mod_authn_default
- Apache模块 mod_authn_file
- Apache模块 mod_authnz_ldap
- Apache模块 mod_authz_dbm
- Apache模块 mod_authz_default
- Apache模块 mod_authz_groupfile
- Apache模块 mod_authz_host
- Apache模块 mod_authz_owner
- Apache模块 mod_authz_user
- Apache模块 mod_autoindex
- Apache模块 mod_cache
- Apache模块 mod_cern_meta
- Apache模块 mod_cgi
- Apache模块 mod_cgid
- Apache模块 mod_charset_lite
- Apache模块 mod_dav
- Apache模块 mod_dav_fs
- Apache模块 mod_dav_lock
- Apache模块 mod_dbd
- Apache模块 mod_deflate
- Apache模块 mod_dir
- Apache模块 mod_disk_cache
- Apache模块 mod_dumpio
- Apache模块 mod_echo
- Apache模块 mod_env
- Apache模块 mod_example
- Apache模块 mod_expires
- Apache模块 mod_ext_filter
- Apache模块 mod_file_cache
- Apache模块 mod_filter
- Apache模块 mod_headers
- Apache模块 mod_ident
- Apache模块 mod_imagemap
- Apache模块 mod_include
- Apache模块 mod_info
- Apache模块 mod_isapi
- Apache模块 mod_ldap
- Apache模块 mod_log_config
- Apache模块 mod_log_forensic
- Apache模块 mod_logio
- Apache模块 mod_mem_cache
- Apache模块 mod_mime
- Apache模块 mod_mime_magic
- Apache模块 mod_negotiation
- Apache模块 mod_nw_ssl
- Apache模块 mod_proxy
- Apache模块 mod_proxy_ajp
- Apache模块 mod_proxy_balancer
- Apache模块 mod_proxy_connect
- Apache模块 mod_proxy_ftp
- Apache模块 mod_proxy_http
- Apache模块 mod_rewrite
- Apache模块 mod_setenvif
- Apache模块 mod_so
- Apache模块 mod_speling
- Apache模块 mod_ssl
- Apache模块 mod_status
- Apache模块 mod_suexec
- Apache模块 mod_unique_id
- Apache模块 mod_userdir
- Apache模块 mod_usertrack
- Apache模块 mod_version
- Apache模块 mod_vhost_alias
- Developer Documentation for Apache 2.0
- Apache 1.3 API notes
- Debugging Memory Allocation in APR
- Documenting Apache 2.0
- Apache 2.0 Hook Functions
- Converting Modules from Apache 1.3 to Apache 2.0
- Request Processing in Apache 2.0
- How filters work in Apache 2.0
- Apache 2.0 Thread Safety Issues
- 词汇和索引
- 词汇表
- 指令索引
- 指令速查
- 模块索引
- 站点导航