本文系本站原创,欢迎转载! 转载请注明出处:
[http://blog.csdn.net/mr_raptor/article/details/7251992](http://blog.csdn.net/mr_raptor/article/details/7251992)
声明:这个控件是在WatermarkedTextBox的基础上改的。
- 从[http://www.windowsphonegeek.com/articles/WP7-WatermarkedTextBox-custom-control](http://www.windowsphonegeek.com/articles/WP7-WatermarkedTextBox-custom-control)上下载WatermarkedTextBox控件
[原创地址:](http://blog.csdn.net/mr_raptor/article/details/7251992)[http://blog.csdn.net/mr_raptor/article/details/7251992](http://blog.csdn.net/mr_raptor/article/details/7251992)[](http://blog.csdn.net/mr_raptor/article/details/7251992)
**原理分析:**
在PasswordBox后面加水印和在TextBox后面加水印差不多,有以下要求:
1. PasswordBox里没内容时,显示水印
1. PasswordBox里有内容时,不显示水印,而显示内容
最简单的想法就是,在PasswordBox控件后面加上一个类似TextBlock的控件,然后重写焦点回调方法,当有焦点时,水印不显示,无焦点时,根据是否有内容而决定是否显示水印。
思路如上,下面开始分析WatermarkedTextBox的代码,看看它的作者是不是和我们想法一样。
**一、 分析WatermarkedTextBox代码**
1. themes/generic.xaml
自定义控件的样式文件必须要以generic.xaml命名,放到themes目录中。
~~~
<ControlTemplate x:Key="PhoneDisabledTextBoxTemplate" TargetType="TextBox"> <ContentControl x:Name="ContentElement" BorderThickness="0" HorizontalContentAlignment="Stretch" Margin="{StaticResource PhoneTextBoxInnerMargin}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="Stretch"/> </ControlTemplate> <Style TargetType="local:WatermarkedTextBox"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="local:WatermarkedTextBox"> <Grid Background="Transparent"> <Border x:Name="EnabledBorder"> <Grid> <ContentControl x:Name="watermarkContent" Style="{TemplateBinding WatermarkStyle}" Content="{TemplateBinding Watermark}" Background="Transparent" Opacity="0.5"/> <ContentControl x:Name="ContentElement" BorderThickness="0" VerticalContentAlignment="Stretch"/> </Grid> </Border> <Border x:Name="DisabledOrReadonlyBorder" Background="Transparent" Visibility="Collapsed"> <TextBox x:Name="DisabledOrReadonlyContent" Background="Transparent" IsReadOnly="True" Text="{TemplateBinding Text}" Template="{StaticResource PhoneDisabledTextBoxTemplate}"/> </Border> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style>
~~~
*注:上面省略了一部分无关紧要代码。*
[http://blog.csdn.net/mr_raptor/article/details/7251992](http://blog.csdn.net/mr_raptor/article/details/7251992)
上面的XAML文件,定义了WatermarkedTextBox的样式:
- 文件开始,定义了一个ControlTemplate元素,由前两节知识可知,它是要对一个控件设置模板,从后面的TargetType="TextBox"可知,是针对TextBox类型控件,它里面自定义了一个ContentControl类名字为ContentElement。
- 通过TargetType="local:WatermarkedTextBox" 可知,它是针对WatermarkedTextBox的控件样式。
- 在EnabledBorder里定义了两个内容控件元素:watermarkContent和ContentElement,watermarkContent里,绑定了依赖属性Watermark(在WatermarkTextBox.cs里声明)。
- 在下面的DisabledOrReadonlyBorder里面是一个TextBox 控件,它绑定了WatermarkedTextBox里的Text属性,同时这个TextBox 控件,的模板设置为:PhoneDisabledTextBoxTemplate,它这么做的目的是,可以设置WatermarkedTextBox的属性为Disabled,这时,水印就消失了,而显示原先的TextBox控件。
2. WatermarkTextBox.cs
~~~
namespace WatermarkedTextBoxControl{ public class WatermarkedTextBox : TextBox { ContentControl WatermarkContent; public static readonly DependencyProperty WatermarkProperty = DependencyProperty.Register("Watermark", typeof(object), typeof(WatermarkedTextBox), new PropertyMetadata(OnWatermarkPropertyChanged)); public static readonly DependencyProperty WatermarkStyleProperty = DependencyProperty.Register("WatermarkStyle", typeof(Style), typeof(WatermarkedTextBox), null); public Style WatermarkStyle { get { return base.GetValue(WatermarkStyleProperty) as Style; } set { base.SetValue(WatermarkStyleProperty, value); } } public object Watermark { get { return base.GetValue(WatermarkProperty) as object; } set { base.SetValue(WatermarkProperty, value); } } public WatermarkedTextBox() { DefaultStyleKey = typeof(WatermarkedTextBox); } public override void OnApplyTemplate() { base.OnApplyTemplate(); this.WatermarkContent = this.GetTemplateChild("watermarkContent") as ContentControl; if(WatermarkContent != null) { DetermineWatermarkContentVisibility(); } } protected override void OnGotFocus(RoutedEventArgs e) { if (WatermarkContent != null && string.IsNullOrEmpty(this.Text)) { this.WatermarkContent.Visibility = Visibility.Collapsed; } base.OnGotFocus(e); } protected override void OnLostFocus(RoutedEventArgs e) { if (WatermarkContent != null && string.IsNullOrEmpty(this.Text)) { this.WatermarkContent.Visibility = Visibility.Visible; } base.OnLostFocus(e); } private static void OnWatermarkPropertyChanged(DependencyObject sender, DependencyPropertyChangedEventArgs args) { WatermarkedTextBox watermarkTextBox = sender as WatermarkedTextBox; if(watermarkTextBox != null && watermarkTextBox.WatermarkContent !=null) { watermarkTextBox.DetermineWatermarkContentVisibility(); } } private void DetermineWatermarkContentVisibility() { if (string.IsNullOrEmpty(this.Text)) { this.WatermarkContent.Visibility = Visibility.Visible; } else { this.WatermarkContent.Visibility = Visibility.Collapsed; } } } }}
~~~
[原创地址:](http://blog.csdn.net/mr_raptor/article/details/7251992)[http://blog.csdn.net/mr_raptor/article/details/7251992](http://blog.csdn.net/mr_raptor/article/details/7251992)[](http://blog.csdn.net/mr_raptor/article/details/7251992)
由这个WatermarkedTextBox类可知:
- 它继承了TextBox类
- 增加了Watermark和WatermarkStyle两个依赖属性,用于用户设置它的水印内容和样式,在Watermark属性里添加了属性改变事件:OnWatermarkPropertyChanged
- 重载了OnApplyTemplate方法来取得generic.xaml文件里声明的元素引用:watermarkContent,并且根据generic.xaml里的TextBox :DisabledOrReadonlyContent,取得它里面是否有内容,如果有内容,则WatermarkContent不可见,否则WatermarkContent可见。
- 重载了OnGotFocus,OnLostFocus,当该自定义控件得到焦点时,设置WatermarkContent不可见,否则WatermarkContent可见。
由上面的分析可知,当用户设置了自定义控件的Watermark属性时,回调注册的OnWatermarkPropertyChanged方法,在该方法里,判断是否WatermarkContent里有内容,如果有,WatermarkContent不可见,否则WatermarkContent可见。两样,重载了OnGotFocus,OnLostFocus,在得到和失去焦点时也要判断是否将WatermarkContent设置为可见与否。
**二、 自定义WatermarkedPasswordBox**
根据前面的分析,我们可以试着做以下修改:
- 新建类WatermarkedPasswordBox
- 将WatermarkTextBox.cs拷贝到类WatermarkedPasswordBox里,改下类名,让WatermarkedPasswordBox继承了Password类
- 在themes/generic.xaml里,拷贝 <Style TargetType="local:WatermarkedPasswordBox">里的全部代码,改为WatermarkedPasswordBox的代码,中间细节自己改就行了,我们不打算支持Disabled属性,所以DisabledOrReadonlyBorder去掉就行了,将EnabledBorder里的ContentElement去掉,换成PasswordBox,名字还是ContentElement
编译时,错误出现了:WatermarkedPasswordBox里this.Text出错,这是因为Password没有Text属性,它有个Password属性,所以要做下面的修改:
- 让WatermarkedPasswordBox类继承TextBox,但是添加一个属性:PasswordBox类型的PasswordContent
- 在OnApplyTemplate方法里,获得自己加的PasswordBox控件的引用ContentElement,为PasswordBox控件添加PasswordChanged事件,当密码框里内容改变时,将TextBox的Text属性的值为PasswordBox.Password的值
- 同样,在XAML样式文件里,在PasswordBox控件里加上 Password="{TemplateBinding Text}"
修改后的代码如下:
XAML:
`<Style TargetType="local:WatermarkedPasswordBox"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="local:WatermarkedPasswordBox"> <Grid Background="Transparent"> <Border x:Name="EnabledBorder" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}" Margin="{StaticResource PhoneTouchTargetOverhang}"> <Grid> <ContentControl x:Name="watermarkContent" Style="{TemplateBinding WatermarkStyle}" Content="{TemplateBinding Watermark}" Background="Transparent" Opacity="0.5"/> <PasswordBox x:Name="ContentElement" Background="Transparent" Password="{TemplateBinding Text}" BorderThickness="0" HorizontalContentAlignment="Stretch" Margin="-12,-12,-12,-12" VerticalContentAlignment="Stretch"/> </Grid> </Border> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style>`
原创地址:[http://blog.csdn.net/mr_raptor/article/details/7251992](http://blog.csdn.net/mr_raptor/article/details/7251992)
C#:
~~~
public class WatermarkedPasswordBox : TextBox { ContentControl WatermarkContent; private PasswordBox PasswordContent; public object Watermark { get { return base.GetValue(WatermarkProperty) as object; } set { base.SetValue(WatermarkProperty, value); } } public static readonly DependencyProperty WatermarkProperty = DependencyProperty.Register("Watermark", typeof(object), typeof(WatermarkedPasswordBox), new PropertyMetadata(OnWatermarkPropertyChanged)); private static void OnWatermarkPropertyChanged(DependencyObject sender, DependencyPropertyChangedEventArgs args) { WatermarkedPasswordBox watermarkTextBox = sender as WatermarkedPasswordBox; if (watermarkTextBox != null && watermarkTextBox.WatermarkContent != null) { watermarkTextBox.DetermineWatermarkContentVisibility(); } Debug.WriteLine("OnWatermarkPropertyChanged"); } public Style WatermarkStyle { get { return base.GetValue(WatermarkStyleProperty) as Style; } set { base.SetValue(WatermarkStyleProperty, value); } } public static readonly DependencyProperty WatermarkStyleProperty = DependencyProperty.Register("WatermarkStyle", typeof(Style), typeof(WatermarkedPasswordBox), null); public WatermarkedPasswordBox() { DefaultStyleKey = typeof(WatermarkedPasswordBox); } public override void OnApplyTemplate() { base.OnApplyTemplate(); this.WatermarkContent = this.GetTemplateChild("watermarkContent") as ContentControl; this.PasswordContent = this.GetTemplateChild("ContentElement") as PasswordBox; if (WatermarkContent != null && WatermarkContent != null) { PasswordContent.PasswordChanged += new RoutedEventHandler(PasswordContent_PasswordChanged); DetermineWatermarkContentVisibility(); } } void PasswordContent_PasswordChanged(object sender, RoutedEventArgs e) { PasswordBox passwdBx = sender as PasswordBox; this.Text = passwdBx.Password; } protected override void OnGotFocus(RoutedEventArgs e) { if (WatermarkContent != null && WatermarkContent != null && string.IsNullOrEmpty(this.PasswordContent.Password)) { this.WatermarkContent.Visibility = Visibility.Collapsed; } base.OnGotFocus(e); } protected override void OnLostFocus(RoutedEventArgs e) { if (WatermarkContent != null && WatermarkContent != null && string.IsNullOrEmpty(this.PasswordContent.Password)) { this.WatermarkContent.Visibility = Visibility.Visible; } base.OnLostFocus(e); } private void DetermineWatermarkContentVisibility() { if (string.IsNullOrEmpty(this.PasswordContent.Password)) { this.WatermarkContent.Visibility = Visibility.Visible; } else { this.WatermarkContent.Visibility = Visibility.Collapsed; } } }
~~~
编译通过,将生成的库引入到Demo程序里,然后将控件加上,成功,效果如下。
左图,未输入内容,显示水印,右图,输入内容时显示效果。
![](https://box.kancloud.cn/2016-04-27_57205d9ad4f88.gif)
![](https://box.kancloud.cn/2016-04-27_57205d9aed160.gif)
本文系本站原创,欢迎转载! 转载请注明出处:
[http://blog.csdn.net/mr_raptor/article/details/7251992](http://blog.csdn.net/mr_raptor/article/details/7251992)[](http://blog.csdn.net/mr_raptor/article/details/7251960)[](http://blog.csdn.net/mr_raptor/article/details/7251942)
- 前言
- WindowsPhone之我见
- 整理Windows Phone 7教程(很全面)
- WindowsPhone XAML语法详解
- WindowsPhone控件详解及引用外部控件Silverlight Toolkit
- Silverlight for Windows Phone Toolkit升级说明
- WindowsPhone统计图表控件 - 第三方控件visifire
- WindowsPhone第三方控件-Resco MobileForms Toolkit 2012
- Windows Phone 7 处理休眠和墓碑的恢复
- WindowsPhone自定义控件详解(一) - 控件类库分析
- WindowsPhone自定义控件详解(二) - 模板类库分析
- WindowsPhone自定义控件详解(三) - 实战:自定义带水印的PasswordBox控件,WatermarkedPasswordBox
- WindowsPhone下拉刷新控件 - PullRefreshListBox(一)