[Manual](https://www.zybuluo.com/L68321/note/1331244) # Operation Manaul of WiFi Temperature Sensor 标签（空格分隔）： eMonitor --- ## 1. Standard Inclusion  ## 2. WiFi Setup  **Step1**, Use your smart device's Wi-Fi connection setup, connect to the iMeter's network, which will show up as eMonitor_xxxxxxxx (xxxxxxxx is unique device SN). The password is 12345678. **Step2**, Whilst connected to the eMonitor's network, open a web browser and navigate to http://192.168.4.1; **Step3**, Connect to your home router by manually input the SSID (your home Wi-Fi networks' SSID) and Key (your home Wi-Fi networks' password) and then click "Save" ## 3. Monitor on DeviceBit ###3.1 How it works  ###3.2 Sign up on DeviceBit  **Step1,** Visit the website http://ht.devicebit.com/, click "Log in", and the login page is shown **Step2,** Click "Sign up", fill up the information on sign up page, enter the meter SN. >SN: Serial Number is unique ID of your Monitor, it is a combination of 8 digits or letters.The WiFi network of iMeter shows up as "**eMonitor_xxxxxxxx**" and "**xxxxxxxx**" is the SN. ### 3.3 Add your monitor on DeviceBit  Login and click "Add A Device". SN and Name must be filled. Normal Value Range and Alarm Sending is optional to be filled. ### 3.4 View your data on webpage After a while, you can view you data on DeviceBit.  ### 3.5 View your data on Wechat You can also view data on Wechat by following DeviceBit Wechat ID. Scan the below QRcode to follow:  Login via Wechat by following steps  View your data on Wechat