Set up Sending Report
First, select ***E-mail*** for Sending Type, and then click on ***Custom Sending Content***
Pic.1 Custom Sending Content
Click on ***Report List***
Pic.2 Add Report List
Fill in the related information.
Example: the power of WIFI Power Monitor. We want to sent the report list of power history curve for the last 3 hours.
Pic.3 Report List Settings
Click on ***Send Immediately*** for testing.
Pic.4 Report List Test
Then, you will receive an E-mail as the following picture shows.
Pic.40 Report List
- DeviceBit User Manual
- Quick Start
- 1. Add A Device
- 2. Add a new sensor or controller
- 3. Data Upload Simulation
- 4. WeChat Alert
- 5. Email Alert
- 6. Data Reports
- 7. Account Settings
- 8. WeChat
- 9. Email Auto-sending
- 10. Email Report
- 11. Control Scheme
- 12. Trigger
- 13. MQTT
- 14. Modbus
- 15. Agent
- 16. Credits
- DeviceBit Open Source Tutorials
- 1. DIY WiFi Particles Monitor
- 2. DIY WiFi Particles & HCHO Monitor
- 3. DIY GPRS Particles Monitor
- 4. GPRS Particles Kit V0.1
- 5. WiFi Socket
- Applicaton Doc
- DTU Tutorial 1: Overview
- DTU Tutorial 2: Using DTU to connect JSY-149 single-phase meter to DeviceBit
- DTU Tutorial 3: Using Python+Openwrt DIY DTU & Connect DeviceBit
- DTU Tutorial 4 DIY Low-cost DeviceBit GPRS DTU
- DTU Tutorial 5: DIY Low-cost DeviceBit WIFI DTU
- DeviceBit Other Platform