# Apache模块 mod_proxy_ajp
| [说明](#calibre_link-11) | `mod_proxy`的扩展，提供Apache JServ Protocol支持 |
| --- | --- |
| [状态](#calibre_link-12) | 扩展(E) |
| [模块名](#calibre_link-13) | proxy_ajp_module |
| [源文件](#calibre_link-14) | proxy_ajp.c |
| [兼容性](#calibre_link-58) | 仅在 Apache 2.1 及以后的版本中可用 |
### 概述
This module _requires_ the service of `mod_proxy`. It provides support for the `Apache JServ Protocol version 1.3` (hereafter _AJP13_).
Thus, in order to get the ability of handling `AJP13` protocol, `mod_proxy`和`mod_proxy_ajp` have to be present in the server.
### 警告
在您没有[对您的服务器采取安全措施](#calibre_link-290)之前，不要启用代理。开放的代理服务器对你自己的内部网络和大规模的Internet网都是有安全隐患的。
## Overview of the protocol
`AJP13` protocol is packet-oriented. A binary format was presumably chosen over the more readable plain text for reasons of performance. The web server communicates with the servlet container over TCP connections. To cut down on the expensive process of socket creation, the web server will attempt to maintain persistent TCP connections to the servlet container, and to reuse a connection for multiple request/response cycles.
Once a connection is assigned to a particular request, it will not be used for any others until the request-handling cycle has terminated. In other words, requests are not multiplexed over connections. This makes for much simpler code at either end of the connection, although it does cause more connections to be open at once.
Once the web server has opened a connection to the servlet container, the connection can be in one of the following states:
* Idle
No request is being handled over this connection.
* Assigned
The connecton is handling a specific request.
Once a connection is assigned to handle a particular request, the basic request informaton (e.g. HTTP headers, etc) is sent over the connection in a highly condensed form (e.g. common strings are encoded as integers). Details of that format are below in Request Packet Structure. If there is a body to the request `(content-length > 0)`, that is sent in a separate packet immediately after.
At this point, the servlet container is presumably ready to start processing the request. As it does so, it can send the following messages back to the web server:
* SEND_HEADERS
Send a set of headers back to the browser.
* SEND_BODY_CHUNK
Send a chunk of body data back to the browser.
* GET_BODY_CHUNK
Get further data from the request if it hasn't all been transferred yet. This is necessary because the packets have a fixed maximum size and arbitrary amounts of data can be included the body of a request (for uploaded files, for example). (Note: this is unrelated to HTTP chunked tranfer).
* END_RESPONSE
Finish the request-handling cycle.
Each message is accompanied by a differently formatted packet of data. See Response Packet Structures below for details.
## Basic Packet Structure
There is a bit of an XDR heritage to this protocol, but it differs in lots of ways (no 4 byte alignment, for example).
Byte order: I am not clear about the endian-ness of the individual bytes. I'm guessing the bytes are little-endian, because that's what XDR specifies, and I'm guessing that sys/socket library is magically making that so (on the C side). If anyone with a better knowledge of socket calls can step in, that would be great.
There are four data types in the protocol: bytes, booleans, integers and strings.
**Byte**
A single byte.
**Boolean**
A single byte, `1 = true`, `0 = false`. Using other non-zero values as true (i.e. C-style) may work in some places, but it won't in others.
**Integer**
A number in the range of `0 to 2^16 (32768)`. Stored in 2 bytes with the high-order byte first.
**String**
A variable-sized string (length bounded by 2^16). Encoded with the length packed into two bytes first, followed by the string (including the terminating '\0'). Note that the encoded length does **not** include the trailing '\0' -- it is like `strlen`. This is a touch confusing on the Java side, which is littered with odd autoincrement statements to skip over these terminators. I believe the reason this was done was to allow the C code to be extra efficient when reading strings which the servlet container is sending back -- with the terminating \0 character, the C code can pass around references into a single buffer, without copying. if the \0 was missing, the C code would have to copy things out in order to get its notion of a string.
### Packet Size
According to much of the code, the max packet size is `8 * 1024 bytes (8K)`. The actual length of the packet is encoded in the header.
### Packet Headers
Packets sent from the server to the container begin with `0x1234`. Packets sent from the container to the server begin with `AB` (that's the ASCII code for A followed by the ASCII code for B). After those first two bytes, there is an integer (encoded as above) with the length of the payload. Although this might suggest that the maximum payload could be as large as 2^16, in fact, the code sets the maximum to be 8K.
| _Packet Format (Server->Container)_ |
| --- | --- | --- | --- | --- | --- |
| Byte | 0 | 1 | 2 | 3 | 4...(n+3) |
| Contents | 0x12 | 0x34 | Data Length (n) | Data |
| _Packet Format (Container->Server)_ |
| --- | --- | --- | --- | --- | --- |
| Byte | 0 | 1 | 2 | 3 | 4...(n+3) |
| Contents | A | B | Data Length (n) | Data |
For most packets, the first byte of the payload encodes the type of message. The exception is for request body packets sent from the server to the container -- they are sent with a standard packet header ( `0x1234` and then length of the packet), but without any prefix code after that.
The web server can send the following messages to the servlet container:
| Code | Type of Packet | Meaning |
| --- | --- | --- |
| 2 | Forward Request | Begin the request-processing cycle with the following data |
| 7 | Shutdown | The web server asks the container to shut itself down. |
| 8 | Ping | The web server asks the container to take control (secure login phase). |
| 10 | CPing | The web server asks the container to respond quickly with a CPong. |
| none | Data | Size (2 bytes) and corresponding body data. |
To ensure some basic security, the container will only actually do the `Shutdown` if the request comes from the same machine on which it's hosted.
The first `Data` packet is send immediatly after the `Forward Request` by the web server.
The servlet container can send the following types of messages to the webserver:
| Code | Type of Packet | Meaning |
| --- | --- | --- |
| 3 | Send Body Chunk | Send a chunk of the body from the servlet container to the web server (and presumably, onto the browser). |
| 4 | Send Headers | Send the response headers from the servlet container to the web server (and presumably, onto the browser). |
| 5 | End Response | Marks the end of the response (and thus the request-handling cycle). |
| 6 | Get Body Chunk | Get further data from the request if it hasn't all been transferred yet. |
| 9 | CPong Reply | The reply to a CPing request |
Each of the above messages has a different internal structure, detailed below.
## Request Packet Structure
For messages from the server to the container of type _Forward Request_:
```
AJP13_FORWARD_REQUEST :=
prefix_code (byte) 0x02 = JK_AJP13_FORWARD_REQUEST
method (byte)
protocol (string)
req_uri (string)
remote_addr (string)
remote_host (string)
server_name (string)
server_port (integer)
is_ssl (boolean)
num_headers (integer)
request_headers *(req_header_name req_header_value)
attributes *(attribut_name attribute_value)
request_terminator (byte) OxFF
```
`request_headers` have the following structure:
```
req_header_name :=
sc_req_header_name | (string) [see below for how this is parsed]
sc_req_header_name := 0xA0xx (integer)
req_header_value := (string)
```
`attributes` are optional and have the following structure:
```
attribute_name := sc_a_name | (sc_a_req_attribute string)
attribute_value := (string)
```
Not that the all-important header is `content-length`, because it determines whether or not the container looks for another packet immediately.
### Detailed description of the elements of Forward Request
### Request prefix
For all requests, this will be 2\. See above for details on other Prefix codes.
### Method
The HTTP method, encoded as a single byte:
| Command Name | Code |
| --- | --- |
| OPTIONS | 1 |
| GET | 2 |
| HEAD | 3 |
| POST | 4 |
| PUT | 5 |
| DELETE | 6 |
| TRACE | 7 |
| PROPFIND | 8 |
| PROPPATCH | 9 |
| MKCOL | 10 |
| COPY | 11 |
| MOVE | 12 |
| LOCK | 13 |
| UNLOCK | 14 |
| ACL | 15 |
| REPORT | 16 |
| VERSION-CONTROL | 17 |
| CHECKIN | 18 |
| CHECKOUT | 19 |
| UNCHECKOUT | 20 |
| SEARCH | 21 |
| MKWORKSPACE | 22 |
| UPDATE | 23 |
| LABEL | 24 |
| MERGE | 25 |
| BASELINE_CONTROL | 26 |
| MKACTIVITY | 27 |
Later version of ajp13, will transport additional methods, even if they are not in this list.
### protocol, req_uri, remote_addr, remote_host, server_name, server_port, is_ssl
These are all fairly self-explanatory. Each of these is required, and will be sent for every request.
### Headers
The structure of `request_headers` is the following: First, the number of headers `num_headers` is encoded. Then, a series of header name `req_header_name` / value `req_header_value` pairs follows. Common header names are encoded as integers, to save space. If the header name is not in the list of basic headers, it is encoded normally (as a string, with prefixed length). The list of common headers `sc_req_header_name`and their codes is as follows (all are case-sensitive):
| Name | Code value | Code name |
| --- | --- | --- |
| accept | 0xA001 | SC_REQ_ACCEPT |
| accept-charset | 0xA002 | SC_REQ_ACCEPT_CHARSET |
| accept-encoding | 0xA003 | SC_REQ_ACCEPT_ENCODING |
| accept-language | 0xA004 | SC_REQ_ACCEPT_LANGUAGE |
| authorization | 0xA005 | SC_REQ_AUTHORIZATION |
| connection | 0xA006 | SC_REQ_CONNECTION |
| content-type | 0xA007 | SC_REQ_CONTENT_TYPE |
| content-length | 0xA008 | SC_REQ_CONTENT_LENGTH |
| cookie | 0xA009 | SC_REQ_COOKIE |
| cookie2 | 0xA00A | SC_REQ_COOKIE2 |
| host | 0xA00B | SC_REQ_HOST |
| pragma | 0xA00C | SC_REQ_PRAGMA |
| referer | 0xA00D | SC_REQ_REFERER |
| user-agent | 0xA00E | SC_REQ_USER_AGENT |
The Java code that reads this grabs the first two-byte integer and if it sees an `'0xA0'` in the most significant byte, it uses the integer in the second byte as an index into an array of header names. If the first byte is not `0xA0`, it assumes that the two-byte integer is the length of a string, which is then read in.
This works on the assumption that no header names will have length greater than `0x9999 (==0xA000 - 1)`, which is perfectly reasonable, though somewhat arbitrary.
### 注意：
The `content-length` header is extremely important. If it is present and non-zero, the container assumes that the request has a body (a POST request, for example), and immediately reads a separate packet off the input stream to get that body.
### Attributes
The attributes prefixed with a `?` (e.g. `?context`) are all optional. For each, there is a single byte code to indicate the type of attribute, and then a string to give its value. They can be sent in any order (thogh the C code always sends them in the order listed below). A special terminating code is sent to signal the end of the list of optional attributes. The list of byte codes is:
| Information | Code Value | Note |
| --- | --- | --- |
| ?context | 0x01 | Not currently implemented |
| ?servlet_path | 0x02 | Not currently implemented |
| ?remote_user | 0x03 |
| ?auth_type | 0x04 |
| ?query_string | 0x05 |
| ?jvm_route | 0x06 |
| ?ssl_cert | 0x07 |
| ?ssl_cipher | 0x08 |
| ?ssl_session | 0x09 |
| ?req_attribute | 0x0A | Name (the name of the attribute follows) |
| ?ssl_key_size | 0x0B |
| are_done | 0xFF | request_terminator |
`context`和`servlet_path` are not currently set by the C code, and most of the Java code completely ignores whatever is sent over for those fields (and some of it will actually break if a string is sent along after one of those codes). I don't know if this is a bug or an unimplemented feature or just vestigial code, but it's missing from both sides of the connection.
`remote_user`和`auth_type` presumably refer to HTTP-level authentication, and communicate the remote user's username and the type of authentication used to establish their identity (e.g. Basic, Digest).
`query_string`, `ssl_cert`, `ssl_cipher`, and `ssl_session` refer to the corresponding pieces of HTTP and HTTPS.
`jvm_route`, is used to support sticky sessions -- associating a user's sesson with a particular Tomcat instance in the presence of multiple, load-balancing servers.
Beyond this list of basic attributes, any number of other attributes can be sent via the `req_attribute` code `0x0A`. A pair of strings to represent the attribute name and value are sent immediately after each instance of that code. Environment values are passed in via this method.
Finally, after all the attributes have been sent, the attribute terminator, `0xFF`, is sent. This signals both the end of the list of attributes and also then end of the Request Packet.
## Response Packet Structure
for messages which the container can send back to the server.
```
AJP13_SEND_BODY_CHUNK :=
prefix_code 3
chunk_length (integer)
chunk *(byte)
AJP13_SEND_HEADERS :=
prefix_code 4
http_status_code (integer)
http_status_msg (string)
num_headers (integer)
response_headers *(res_header_name header_value)
res_header_name :=
sc_res_header_name | (string) [see below for how this is parsed]
sc_res_header_name := 0xA0 (byte)
header_value := (string)
AJP13_END_RESPONSE :=
prefix_code 5
reuse (boolean)
AJP13_GET_BODY_CHUNK :=
prefix_code 6
requested_length (integer)
```
### Details:
### Send Body Chunk
The chunk is basically binary data, and is sent directly back to the browser.
### Send Headers
The status code and message are the usual HTTP things (e.g. `200`和`OK`). The response header names are encoded the same way the request header names are. See header_encoding above for details about how the the codes are distinguished from the strings.
The codes for common headers are:
| Name | Code value |
| --- | --- |
| Content-Type | 0xA001 |
| Content-Language | 0xA002 |
| Content-Length | 0xA003 |
| Date | 0xA004 |
| Last-Modified | 0xA005 |
| Location | 0xA006 |
| Set-Cookie | 0xA007 |
| Set-Cookie2 | 0xA008 |
| Servlet-Engine | 0xA009 |
| Status | 0xA00A |
| WWW-Authenticate | 0xA00B |
After the code or the string header name, the header value is immediately encoded.
### End Response
Signals the end of this request-handling cycle. If the `reuse` flag is true `(==1)`, this TCP connection can now be used to handle new incoming requests. If `reuse` is false (anything other than 1 in the actual C code), the connection should be closed.
### Get Body Chunk
The container asks for more data from the request (If the body was too large to fit in the first packet sent over or when the request is chuncked). The server will send a body packet back with an amount of data which is the minimum of the `request_length`, the maximum send body size `(8186 (8 Kbytes - 6))`, and the number of bytes actually left to send from the request body.
If there is no more data in the body (i.e. the servlet container is trying to read past the end of the body), the server will send back an _empty_ packet, which is a body packet with a payload length of 0. `(0x12,0x34,0x00,0x00)`
- Apache HTTP Server Version 2.2 文档 [最后更新：2006年3月21日]
- 版本说明
- 从1.3升级到2.0
- 从2.0升级到2.2
- Apache 2.2 新特性概述
- Apache 2.0 新特性概述
- The Apache License, Version 2.0
- 参考手册
- 编译与安装
- 启动Apache
- 停止和重启
- 配置文件
- 配置段(容器)
- 缓冲指南
- 服务器全局配置
- 日志文件
- 从URL到文件系统的映射
- 安全方面的提示
- 动态共享对象(DSO)支持
- 内容协商
- 自定义错误响应
- 地址和端口的绑定(Binding)
- 多路处理模块
- Apache的环境变量
- Apache处理器的使用
- 过滤器(Filter)
- suEXEC支持
- 性能方面的提示
- URL重写指南
- Apache虚拟主机文档
- 基于主机名的虚拟主机
- 基于IP地址的虚拟主机
- 大批量虚拟主机的动态配置
- 虚拟主机示例
- 深入研究虚拟主机的匹配
- 文件描述符限制
- 关于DNS和Apache
- 常见问题
- 经常问到的问题
- Apache的SSL/TLS加密
- SSL/TLS高强度加密：绪论
- SSL/TLS高强度加密：兼容性
- SSL/TLS高强度加密：如何...?
- SSL/TLS Strong Encryption: FAQ
- 如何.../指南
- 认证、授权、访问控制
- CGI动态页面
- 服务器端包含入门
- .htaccess文件
- 用户网站目录
- 针对特定平台的说明
- 在Microsoft Windows中使用Apache
- 在Microsoft Windows上编译Apache
- Using Apache With Novell NetWare
- Running a High-Performance Web Server on HPUX
- The Apache EBCDIC Port
- 服务器和支持程序
- httpd - Apache超文本传输协议服务器
- ab - Apache HTTP服务器性能测试工具
- apachectl - Apache HTTP服务器控制接口
- apxs - Apache 扩展工具
- configure - 配置源代码树
- dbmmanage - 管理DBM格式的用户认证文件
- htcacheclean - 清理磁盘缓冲区
- htdbm - 操作DBM密码数据库
- htdigest - 管理用于摘要认证的用户文件
- httxt2dbm - 生成RewriteMap指令使用的dbm文件
- htpasswd - 管理用于基本认证的用户文件
- logresolve - 解析Apache日志中的IP地址为主机名
- rotatelogs - 滚动Apache日志的管道日志程序
- suexec - 在执行外部程序之前切换用户
- 其他程序
- 杂项文档
- 与Apache相关的标准
- Apache模块
- 描述模块的术语
- 描述指令的术语
- Apache核心(Core)特性
- Apache MPM 公共指令
- Apache MPM beos
- Apache MPM event
- Apache MPM netware
- Apache MPM os2
- Apache MPM prefork
- Apache MPM winnt
- Apache MPM worker
- Apache模块 mod_actions
- Apache模块 mod_alias
- Apache模块 mod_asis
- Apache模块 mod_auth_basic
- Apache模块 mod_auth_digest
- Apache模块 mod_authn_alias
- Apache模块 mod_authn_anon
- Apache模块 mod_authn_dbd
- Apache模块 mod_authn_dbm
- Apache模块 mod_authn_default
- Apache模块 mod_authn_file
- Apache模块 mod_authnz_ldap
- Apache模块 mod_authz_dbm
- Apache模块 mod_authz_default
- Apache模块 mod_authz_groupfile
- Apache模块 mod_authz_host
- Apache模块 mod_authz_owner
- Apache模块 mod_authz_user
- Apache模块 mod_autoindex
- Apache模块 mod_cache
- Apache模块 mod_cern_meta
- Apache模块 mod_cgi
- Apache模块 mod_cgid
- Apache模块 mod_charset_lite
- Apache模块 mod_dav
- Apache模块 mod_dav_fs
- Apache模块 mod_dav_lock
- Apache模块 mod_dbd
- Apache模块 mod_deflate
- Apache模块 mod_dir
- Apache模块 mod_disk_cache
- Apache模块 mod_dumpio
- Apache模块 mod_echo
- Apache模块 mod_env
- Apache模块 mod_example
- Apache模块 mod_expires
- Apache模块 mod_ext_filter
- Apache模块 mod_file_cache
- Apache模块 mod_filter
- Apache模块 mod_headers
- Apache模块 mod_ident
- Apache模块 mod_imagemap
- Apache模块 mod_include
- Apache模块 mod_info
- Apache模块 mod_isapi
- Apache模块 mod_ldap
- Apache模块 mod_log_config
- Apache模块 mod_log_forensic
- Apache模块 mod_logio
- Apache模块 mod_mem_cache
- Apache模块 mod_mime
- Apache模块 mod_mime_magic
- Apache模块 mod_negotiation
- Apache模块 mod_nw_ssl
- Apache模块 mod_proxy
- Apache模块 mod_proxy_ajp
- Apache模块 mod_proxy_balancer
- Apache模块 mod_proxy_connect
- Apache模块 mod_proxy_ftp
- Apache模块 mod_proxy_http
- Apache模块 mod_rewrite
- Apache模块 mod_setenvif
- Apache模块 mod_so
- Apache模块 mod_speling
- Apache模块 mod_ssl
- Apache模块 mod_status
- Apache模块 mod_suexec
- Apache模块 mod_unique_id
- Apache模块 mod_userdir
- Apache模块 mod_usertrack
- Apache模块 mod_version
- Apache模块 mod_vhost_alias
- Developer Documentation for Apache 2.0
- Apache 1.3 API notes
- Debugging Memory Allocation in APR
- Documenting Apache 2.0
- Apache 2.0 Hook Functions
- Converting Modules from Apache 1.3 to Apache 2.0
- Request Processing in Apache 2.0
- How filters work in Apache 2.0
- Apache 2.0 Thread Safety Issues
- 词汇和索引
- 词汇表
- 指令索引
- 指令速查
- 模块索引
- 站点导航