## 1. Hardware Package Package 1 (Temperature only):  Package 2 (Temperature and Humidity):  ## 2. Wi-Fi Setup Plug the sensor cable and USB power cable and power on the monitor. Next you need to setup the Wi-Fi configuration to connect the monitor to the Wi-Fi network of your home router.  **Step1**, Use your smart device's Wi-Fi connection setup, connect to the iMeter's network, which will show up as eMonitor_xxxxxxxx (xxxxxxxx is unique device SN). The password is 12345678. **Step2**, Whilst connected to the eMonitor's network, open a web browser and navigate to http://192.168.4.1; **Step3**, Connect to your home router by manually input the SSID (your home Wi-Fi networks' SSID) and Key (your home Wi-Fi networks' password) and then click "Save" **Step4**, If the Wi-Fi monitor successfully connected to your home router after configuration, its Wi-Fi network will be disappeared. You can find the Wi-Fi monitor in your PC's network, which will be shown up as eMonitor_xxxxxxxx (xxxxxxxx is the unique SN of eMonitor). For next step, if you will monitor the data on DeviceBit Cloud, please refer to [Chapeter 4: Operation on Cloud](/doc/htmonitor/operation-on-cloud.html); if you will upload the data to your own server, please refer to [Chapeter 5: Connect to Your Own Server](/doc/htmonitor/operation-on-cloud.html); if you will monitor the data locally via LAN on your PC, please refer to [Chapeter 6: Monitor Locally via LAN](/doc/htmonitor/operation-on-cloud.html).