## Keyboard Logout This example uses the Keyboard library to log you out of your user session on your computer when pin 2 on your Leonardo, Micro or Due is pulled to ground. The sketch simulates the keypress in sequence of two or three keys at the same time and after a short delay it releases them. NB: When you use the Keyboard.print() command, the Arduino takes over your computer's keyboard! To insure you don't lose control of your computer while running a sketch with this function, make sure to set up a reliable control system before you call Keyboard.print(). This sketch is designed to only send a Keyboard command after a pin has been pulled to ground. ### Hardware Required * Arduino Leonardo, Micro, or Due board * pushbutton * hook-up wires * breadboard ### Circuit click the image to enlarge [](https://www.arduino.cc/en/uploads/Tutorial/KeybLogoutFritz.png) image developed using [Fritzing](http://www.fritzing.org/). For more circuit examples, see the [Fritzing project page](http://fritzing.org/projects/) ### Schematic click the image to enlarge [](https://www.arduino.cc/en/uploads/Tutorial/KeybLogoutScheme.png) ### Code Before you upload the program to your board, make sure to assign the correct OS you are currently using to the platform variable. While the sketch is running, pressing the button will connect pin 2 to ground and the board will send the logout sequence to the USB connected pc. /*   Keyboard logout   This sketch demonstrates the Keyboard library.   When you connect pin 2 to ground, it performs a logout.   It uses keyboard combinations to do this, as follows:   On Windows, CTRL-ALT-DEL followed by ALT-l   On Ubuntu, CTRL-ALT-DEL, and ENTER   On OSX, CMD-SHIFT-q   To wake: Spacebar.   Circuit:   - Arduino Leonardo or Micro   - wire to connect D2 to ground   created 6 Mar 2012   modified 27 Mar 2012   by Tom Igoe   This example is in the public domain.   http://www.arduino.cc/en/Tutorial/KeyboardLogout */ #define OSX 0 #define WINDOWS 1 #define UBUNTU 2 #include "Keyboard.h" // change this to match your platform: int platform = OSX; void setup() {   // make pin 2 an input and turn on the pull-up resistor so it goes high unless   // connected to ground:   pinMode(2, INPUT_PULLUP);   Keyboard.begin(); } void loop() {   while (digitalRead(2) == HIGH) {     // do nothing until pin 2 goes low     delay(500);   }   delay(1000);   switch (platform) {     case OSX:       Keyboard.press(KEY_LEFT_GUI);       // Shift-Q logs out:       Keyboard.press(KEY_LEFT_SHIFT);       Keyboard.press('Q');       delay(100);       Keyboard.releaseAll();       // enter:       Keyboard.write(KEY_RETURN);       break;     case WINDOWS:       // CTRL-ALT-DEL:       Keyboard.press(KEY_LEFT_CTRL);       Keyboard.press(KEY_LEFT_ALT);       Keyboard.press(KEY_DELETE);       delay(100);       Keyboard.releaseAll();       // ALT-l:       delay(2000);       Keyboard.press(KEY_LEFT_ALT);       Keyboard.press('l');       Keyboard.releaseAll();       break;     case UBUNTU:       // CTRL-ALT-DEL:       Keyboard.press(KEY_LEFT_CTRL);       Keyboard.press(KEY_LEFT_ALT);       Keyboard.press(KEY_DELETE);       delay(1000);       Keyboard.releaseAll();       // Enter to confirm logout:       Keyboard.write(KEY_RETURN);       break;   }   // do nothing:   while (true); } [[Get Code]](https://www.arduino.cc/en/Tutorial/KeyboardLogout?action=sourceblock&num=1) ### See Also * [Keyboard.write](https://www.arduino.cc/en/Reference/KeyboardWrite)() * [Keyboard.print](https://www.arduino.cc/en/Reference/KeyboardPrint)() * [Keyboard.println](https://www.arduino.cc/en/Reference/KeyboardPrintln)() * [KeyboardMessage](https://www.arduino.cc/en/Tutorial/KeyboardMessage) - Sends a text string when a button is pressed. * [KeyboardReprogram](https://www.arduino.cc/en/Tutorial/KeyboardReprogram) - Opens a new window in the Arduino IDE and reprograms the Leonardo with a simple blink program. * [KeyboardSerial](https://www.arduino.cc/en/Tutorial/KeyboardSerial) - Reads a byte from the serial port, and sends back a keystroke. * [KeyboardAndMouseControl](https://www.arduino.cc/en/Tutorial/KeyboardAndMouseControl) - Demonstrates the Mouse and Keyboard commands in one program. * [ButtonMouseControl](https://www.arduino.cc/en/Tutorial/ButtonMouseControl) - Control cursor movement with 5 pushbuttons. * [JoystickMouseControl](https://www.arduino.cc/en/Tutorial/JoystickMouseControl) - Controls a computer's cursor movement with a Joystick when a button is pressed.